This is how roots in drains looks like! The latest thing you want to see

roots in drains

Source: Maintain Drains

Disgusting, isn’t it? Although we know it’s just roots but it still looks so dirty and hairy over there.

Eventually, especially if you live in a wooden area or where trees are in abundance, tree roots will find its way into drains. However, this does not mean you should simply raise your hands in surrender. The first thing to do is to understand why it happens and what you can do. What do you do with roots in drains?

How roots end up in the drain?

Tree roots in the drain can be considered as natural occurrences because it is drawn to warm water. The vapor that escapes into the soil acts as a magnet that attracts tree roots growth towards it. How does the vapor escape? Usually through cracks or loose joints in the drain pipes.

These same cracks and loose joints serve as entry points for the roots seeking out moisture and nutrients. Basically, tree roots end up in drains because of its nature to seek out water sources.

What happens if roots aren’t removed?

This is a very good question. Is there anything wrong with allowing tree roots to stay in your drains? After all, it just wants nutrients and water for its growth.

The reality is that tree roots in drains can be extremely harmful because it can bring about conditions like clogged drains. When you have a blocked drain, there is a high probability of unpleasant odor and sights creeping into your home.

Your drain pipes may also crack or burst if the tree root growth is not abated. This means costly and dangerous consequences for you and your family.

roots in drains

How to prevent roots from getting inside of the drain?

Is there any way to prevent tree roots in sewer lines? There are some control methods that can help in minimizing the problem. These control methods fall into any of three categories.

  • Physical – these remedies require the lining or replacement of damaged pipes to prevent collapse as well as seal potential entry points.
  • Mechanical – it entrails mechanically removing the roots growing inside the sewer. The tree roots in drain lines can be subjected to cutters, augers, and other equipment that will remove existing blockage.
  • Chemical – although instant death awaits the tree roots, chemicals may pose some dangers to the environment, which may also negatively impact the potable water supply in your area. The effectiveness is quite limited since the chemical do not stay in the pipes long and may be flush down the drain lines.

Perhaps the best prevention would be to use a combination of these suggested control methods to keep roots in drain lines in check.

Signs of roots in the drain

Is there an effective way on how to detect if there are roots in the drain? In the absence of detection equipment, common signs of roots in sewer lines can be used as a gauge. These signs include:

  • Visible Sink Holes – this is one of the few visual clues of the presence of tree roots. The sink holes are the result of water leaking into the top soil creating soft spots that sink down.
  • Drainage Problems – it can be anything from slow drains to gurgling noises from your toilets. Although circumstantial, it is best to call a plumbing professional to have it checked.
  • Boosted Tree Growth – when trees get the nutrients and water supply it needs, it can grow faster than normal. If this happens to trees and other plants in your property, this can be a sign of roots invading your drains.
  • Foul Odors –similar to rotten eggs, these are the results of sewer gases escaping from the sewer and into your home.

roots in drains

Source: Clear First Drainage and Blocked Drains Wirral

How to deal with roots?

The steps of removing roots from sewer drain can vary depending on the method to be used. Normally, when the problem is not isolated in a single location, you can remove roots from drain lines with the help of chemical cleaners. This is done by locating the main line, usually outside your home, which looks like a Y-shaped access port.

If you are using an auger tool to remove sewer pipe clog, you will need to feed the tool into the pipe access closest to the location of the problem. A twisting motion is usually used to dislodge any obstruction.

Some steps may be more complicated than others, which is why professional help is best most of the time.

Why you need professional plumber to do it?

When do you know it is time to call in professionals? Basically, when the chemicals and industrial auger solutions do not work. You may even try to use high-pressure hoses, but may not be enough to solve the problem.

This is because the only possible solution may be a replacement of the problematic section of the sewer pipe. You need a trusted plumber to help you restore the functionality of your drains.

To help you solve roots in drains or any plumbing problems, call Emergency Response Plumbers (ERP) today!

Call Us Today 949-793-7076